Castle EDGE HV 80 Brushless ESC HES08002 / 010-0105-00

$253.27 $202.62

Product Information

  • Product Code: HES08002 / 010-0105-00

  • Manufacturer: Castle Creations

  • Stock Level: 1

QTY:

Product Information

 

Product:
Package:
Instructions: Specification:
Fearture:
- The new Castle Edge ESC provide New Phoenix Controller AUX Line within more options as below:
a. Gain input-
Allow the ESC to utilize an additional receiver channel to adjust the governor gain.
b. RPM out-
Toggles the AUX Line for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Excessive load detection-
Prevent damage caused by large current spikes typically caused by too much load or possibly a short in the motor wires.
d. Audible Beacon-
The controller will emit an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is only emitted if the motor is not running 
e. Log Data Reset Percentage-
The users may select a percentage of the data buffer which all data is erased upon ESC boot up.
This helps to ensure that the most recent flight is logged. 
- Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
- Opto isolated throttle cable helps reduce radio interference.
- Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight.
 
- Surge current:80Amps
- Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
- Max Supporting input voltage:50v(12s Li-Po/36 cells Nicad/NiMH)
- Size:71X33X22.9mm
- Weight:121g
Please download the lastest version for your Castle Link

NOTE: Not including BEC. User need to provide the power for receiver and servo.