Lynx Blade 180 CFX EOX 1611 5500Kv 3S Motor Upgrade LX1789A

$52.90 $26.45

Product Information

  • Product Code: LX1789A

  • Manufacturer: Lynx

  • Stock Level: 1

QTY:

Product Information

EOX-1611 developed by Lynx, this motors is perhaps the ultimate 180CFX  helicopter motor upgrade.

Featuring a parallel 0.5mm diameter wiring coil, manually assembly for the best efficiency, power and cool running.

High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.

 

The EOX-1611 is the biggest motor that can fit on standard 180CFX, designed specifically for the 180CFX with 5500KV and three Radial Bearing that support the shaft.

Special Motor Support was necessary, and the EOX-1611 come preassembled ready to be installed on 180CFX.

Designed in order to provide the maximum power when with 3S battery pack, 10T and 11T Pinions are included in order to give you the best motor and RPM set-up.

NOTE: EOX-1611 can also run with 4S (only with Governor Management and 9T Pinion).

 

Overall dimension was designed to fit in the standard frame without any modification.

So the next time you want to upgrade your helicopter – think Lynx EOX!

 

TECHNICAL SPECIFICATION:

 

Motor Kv

5500KV

Max Lipo Cell

3s  or 4s (4s only with GOV)

Max Continuous Current

30A

Max Continuous Power

390W

Stator Diameter

16mm

Stator Length

11mm

No. of Stator Arms

9

No. Magnet Poles

6

Parallel Wire Diam.

0.5 mm

Weight

23.6g

Outside Diameter

20.5mm

Body Length

18.5mm

Shaft Diameter and Support

Inner 3mm / Pinion 2 mm (Triple Bearing)

Overall Shaft Length

29.8mm

Motor Timing

5deg

Drive Frequency

8kHz

 

PACKING LIST:

1 x EOX 1611 Motor with preinstalled Motor Mount and 2mm Connector Plug

1 x Hard steel pinion 10 tooth

1 x Hard steel pinion 11 tooth

1 x Set Hardware (screw and “C” Washer)

1 x Sand Paper Tab (Shaft Cleaning before pinion bonding)

 

IMPORTANT USER INFORMATION:

We REMIND  that Lynx EOX 1611 – 5500 KV was designed to work on 180CFX when powered with 3S battery pack. If used with 4S battery the result will be dangerous high RPM. If you want use 4S a good Governor Management is necessary and 9T Pinion.

Our 4S test was made with 4S-450 Lipo and Brain Governor System. Without Governor Management the risk or overshoot the Head Speed can be really dangerous. We recommend to carefully managing 4S Lipo Battery Set-Up.