Perfect Regulators HV BEC Pro prr-hvbecp

$120.00 $102.00

Product Information

QTY:

Product Information

The New HV BEC Pro is capable of 20v - 60v (6s - 14s) input and with a selectable output voltage of 6v or 8v to meet the most popular needs for most pilots. As an added feature, The HV BEC Pro has a built in Power Bus, all 3 Cyclic Servos and Rudder Servo connects directly to the HV BEC Pro and signals are carried through via patch cables from the Rx/FBL unit to the HV BEC Pro.

Simply connect the pre-tinned input wires to a connector of your choice, or solder direcly to the input leads on the ESC, mount the unit, run the patch cables to your Rx/FBL unit, connect the Servos, select the output voltage and thats it. No need to mess with with anything else, go out and have fun and fly!!!

Unit comes packaged with 1 x 6" Male to Male, 22AWG Servo Extension and 1 x 6" Male to 3 Male 22AWG Servo Extension.

It's truly a "PLUG-N-FLY" setup...

Min. Input Voltage: 20v - (6s Lipo)
Max. Input Voltage: 60v - (14s Lipo)
Primary Output Voltage: 6v / 8v @ 10A/14A
Length of RX Lead Plugs: 6" Each
Plug Type: Universal
Length of Input Leads: 8" 16AWG Silicone (No Connector)
Size: 40mm x 26.6mm x 13.25mm
Weight: 24g
Download Manual  


* DO NOT RUN IN PARALLEL WITH ANY OTHER POWER SOURCES (ie... BATTERY PACKS, DC CUP CAPICATOR BANKS OR OTHER BEC'S), THIS MAY DAMAGE THE HV BEC + AND VOID THE WARRANTY.

* ONLY USE THE HV BEC + V2 TO POWER YOUR RX AND ELECTRONICS.