Spartan Vortex Nano VX1N

$312.49 $265.62

Product Information

  • Product Code: VX1N

  • Manufacturer: Spartan RC

  • Stock Level: 1

QTY:

Product Information

Spartan Vortex VX1n

 

Designed for 3D Pro pilots and beginner alike the Vortex VX1 and VX1n will amaze you with their performance, features and intuitive installation.

 

Tail - Based on Spartan's market leading gyro technology the Vortex is capable of delivering exceptional tail hold and consistent yaw rates even at eye-blurring speeds of over three full turns per second.
Rotor - The cyclic and collective controls are smooth and precise with a very solid feel and impressive response time. Factory calibrated sensors and Spartan's proprietary piro compensation technology enable your helicopter to remain locked in through piro moves.
Governor - The built in governor provides Nitro and Electric* modes and support for both magnetic and phase sensors. Cross mixing and look-ahead algorithms ensure that power is delivered in time and not as a result of RPM decay.
Receiver - The Vortex supports SBUS & PPM single wire receiver connections, 1 or 2 Satellites and individual channel connections to traditional receivers. Additional channels provided by SBUS, PPM & Satellite receivers can be routed to the three AUX outputs.
Setup - Using the Spartan DataPod field programmer your new Vortex can be installed and configured in minutes. Adjustments can also be done at the field without the need to carry a computer. The DataPod also doubles as USB interface enabling the Vortex to receive firmware updates.
Power - The Vortex operates at both classic 5V and high voltage 8.4V (2S) power systems. The DataPod port of the Vortex also doubles as secondary power connection point when additional current is needed for high torque servos.
The easy setup, high vibration immunity, and unparalleled performance are guaranteed to give a hassle free installation and enjoyment of your hobby. Backed up with Spartan's industry-leading warranty and including 3 years free repair service and 50% RRP discounted crash replacements (redeemed @ SpartanRC directly) the Vortex offers market leading performance, exceptional value and reassurance.

Key features:

  • Designed for all helicopters; from the smallest electric to the largest nitro
  • Market leading tail hold and pirouetting consistency
  • Small and lightweight
  • Compatible with all digital tail servos (760us, 960us and 1520us)
  • Compatible with digital and analog swash servos
  • Compatible with standard pulse, PPM, SBUS and 1 or 2 satellite receivers
  • Built in governor with Nitro and Electric* modes
  • Superior balanced ring MEMS sensor technology
  • Easy configuration and field adjustments via the Spartan DataPod. You can deploy a new system in minutes
  • Firmware upgradable
  • Four configuration memories that can be selected in-flight for different flying styles. They can be mapped to Normal, Idle1, Idle2 & Hold or as the user requires
 
A DataPod is required for configuring the Vortex. One DataPod is sufficient for configuring all your Vortex systems as it does not need to be permanently mounted on the helicopter.
 
 
 
  Vortex Pro VX1 Vortex Nano VX1n Vortex Esprit VX1e
Flight Performance
Sensor Type
PinPoint

PinPoint

MPU-6000
Sensor Technology MEMS-Ring MEMS-Ring MEMS
Sensor Interface Digital Digital Digital
Sensor Specification
Vibration Resistance
Remote Sensor - -
Built-in USB Port - -
USB via DataPod
PC Software
DataPod Required Required Optional
Governor
HV Compatible
Event Logging
Recommended For Jet, Gas, Nitro, Elect. Gas, Nitro, Elect. Nitro, Elect.
Control System Proprietary PID with adaptive tuning
Supported Receivers Standard Pulse, PPM, SBUS, XBUS, UDI, SRXL, SUMD, DSM2, DSMX
Satellites 1 or 2 1 or 2 1 or 2
Radio Channels Minimum 5, 6 recommended
Tail Servos Digital 760us, 960us and 1520us centre pulse
Swash Servos Digital or analog 1520us centre pulse
Operating voltage 3.8V to 8.4V (<100mA)
Dimensions
Flight Controller
34 x 23.8 x 11mm
1.34 x 0.94 x 0.43in
36.6 x 23.8 x 14.4mm
1.44 x 0.94 x 0.57in
Dimensions
Remote Sensor
20.6 x 20.6 x 9.6mm
0.81 x 0.81 x 0.36in
N/A N/A
Sensor Lead 16cm 6.3in long N/A N/A
Weight 14 grams 11 grams 11 grams
Warranty Years * 1+2 1+2 1+1
Crash Replacement ** 50% 50% 50%
Box Contents Spartan VX1
Remote Sensor
Welcome Card
Receiver Cables
Adhesive Pads
Canopy Decals
Spartan VX1n
Welcome Card
Receiver Cables
Adhesive Pads
Canopy Decals
Spartan VX1e
Welcome Card
Receiver Cables
Adhesive Pads
Canopy Decals